Master Lock and Number Lock Unlock Hack - Hack For fun
Hey, Have you ever tried to impress your friends by picking one
of those Master combination locks and failed? Well then read on.
The Master lock company has made this kind of lock with a
protection scheme. If you pull the handle of it hard, the knob
won't turn. That was their biggest mistake..
... Ok, now on to it. 1st number. Get out any of the Master locks so you know what's going on. 1: The handle part (the part that springs open when you get the combination), pull on it, but not enough so that the knob won't move. 2: While pulling on it turn the knob to the left until it won't move any more. Then add 5 to this number. Congradulations, you now have the 1st number. 2nd number. (a lot tougher) Ok, spin the dial around a couple of times, then go to the 1st number you got, then turn it to the right, bypassing the 1st number once. WHEN you have bypassed. Start pulling the handle and turning it. It will eventually fall into the groove and lock. While in the groove pull on it and turn the knob. If it is loose go to the next groove; if it's stiff you got the second number. 3rd number: After getting the 2nd, spin the dial, then enter the 2 numbers, then after the 2nd, go to the right and at all the numbers pull on it. The lock will eventually open if you did it right. If can't do it the first time, be patient, it takes time.
... Ok, now on to it. 1st number. Get out any of the Master locks so you know what's going on. 1: The handle part (the part that springs open when you get the combination), pull on it, but not enough so that the knob won't move. 2: While pulling on it turn the knob to the left until it won't move any more. Then add 5 to this number. Congradulations, you now have the 1st number. 2nd number. (a lot tougher) Ok, spin the dial around a couple of times, then go to the 1st number you got, then turn it to the right, bypassing the 1st number once. WHEN you have bypassed. Start pulling the handle and turning it. It will eventually fall into the groove and lock. While in the groove pull on it and turn the knob. If it is loose go to the next groove; if it's stiff you got the second number. 3rd number: After getting the 2nd, spin the dial, then enter the 2 numbers, then after the 2nd, go to the right and at all the numbers pull on it. The lock will eventually open if you did it right. If can't do it the first time, be patient, it takes time.
No comments:
Post a Comment